Valves
1. Aluminium butterfly valves
Disk: SINT® polymer, cast iron or stainless steel;
Sizes: DN100, DN150, DN200, DN250,DN300, DN350, DN400;
Versions: with one flange that are suitable to put a soft connecting sleeve on, or with two flanges;
Drive: manual, electro-pneumatic or gear motor;
< Top>
2. Steel butterfly valves
With square upper flange and round lower flange. Due to the four corner slots the integrated upper square flange can be adapted to different sizes of silo outlet flanges.
Drive: manual;
< Top>
3. Slide valves
Body: carbon steel or stainless steel, which is partly coated with SINT® engineering polymer;
Sliding blade: carbon steel or stainless steel;
Versions: round opening, square opening, rectangular opening;
Drive: manual, electro-pneumatic or gear motor;
< Top>
4. Rotary valves
The rotary valves are suitable for controlled discharging and feeding of powdery or granular materials from silos, hoppers, pneumatic conveying systems, bag filter houses, or cyclones.
Throughput rate: 2.2 до 19.5 liters per revolution;
Speed: 20 rpm or 30 rpm
< Top>
5. Diverter valves
5.1. Diverter valves with square flanges
Body: stainless steel lined with SINT® engineering polymer;
Drive: manual, electro-pneumatic or gear motor;
5.2. Diverter valves V-type
Application: the V-Diverter valve is used especially for diverting the bulk material flow in pneumatic dense- and dilutephase conveying systems;
Body: aluminium or stainless steel;
Size DN 80 – DN 300
< Top> |
